Each component of the winding machine is indispensable to complete the entire process
With the development of modern numerical control technology, the integration scale of circuits is getting bigger and bigger, and the technology is getting more and more complicated. According to the conventional method, it is difficult to locate the fault in a small area, and once the system fails, this method can be used. Shorten downtime and quickly find faulty switches. There are many components of the winding machine, and they play different roles. The composition of various controllers can form a complete set of processing and operation technology.
What role does the sensor play in the winding machine?
Detection of various parameters such as counting and speed
The counting function is a basic function realized by the sensor in the winding machine. It mainly counts the output of the winding machine and the number of turns of the winding machine spindle; the rotation speed of the spindle is also realized by the sensor, through these data , The user can easily calculate the output, and there are unified data for different wire diameters and different winding speeds. These are the functions of the sensor in the winding machine.
Displacement detection, safety limit
In the arranging system of the automatic winding machine, a sensor is needed to tell the equipment which position is the starting point and which position is the maximum value. These are all done by sensors. Today's automatic winding machines no longer require manual operations. , Each position in the winding machine is equipped with sensors, and the completion of a series of actions such as the in-position of the skeleton and the position of the tailstock depends on the sensors.
The function program can be used to check the accuracy and reliability of the specific functions of the winding machine, so as to quickly determine which function of the system is not good, and then determine the possible cause of the failure. This method is difficult to determine whether it is a programming or operating error, or a fault in the winding machine, for a long-term lack of maintenance and long-term idle inspection of the CNC winding machine and the second startup, as well as the red line machine causing a large amount of waste but no alarm. It is a better way to judge the failure of the winding machine. Moreover, the function test program can be run several times continuously to diagnose the stability of the system operation of the entire winding machine.